source.tex 25.1 KB
Newer Older
1
\section{Installing from Source}
2
\label{s:installation:source}
3

4
This section explains how to build Nektar++ from the source-code package.
5
6

Nektar++ uses a number of third-party libraries. Some of these are required,
7
8
9
10
11
12
others are optional. It is generally more straightforward to use versions of
these libraries supplied pre-packaged for your operating system, but if you run
into difficulties with compilation errors or failing regression tests, the
Nektar++ build system can automatically build tried-and-tested versions of these
libraries for you. This requires enabling the relevant options in the CMake
configuration.
13
14
15
16
17
18
19
20
21
22


\subsection{Obtaining the source code}
There are two ways to obtain the source code for \nekpp:
\begin{itemize}
	\item Download the latest source-code archive from the
	\href{http://www.nektar.info/downloads}{Nektar++ downloads page}.
	\item Clone the git repository
	\begin{itemize}
	\item Using anonymous access. This does not require
23
24
25
	credentials but any changes to the code cannot be pushed to the
	public repository. Use this initially if you would like to try using 
	Nektar++.
26
27
28
29
30
31
32
33
    \begin{lstlisting}[style=BashInputStyle]
        git clone http://gitlab.nektar.info/clone/nektar.git nektar++
    \end{lstlisting}
	\item Using authenticated access. This will allow you to directly contribute
	back into the code.
    \begin{lstlisting}[style=BashInputStyle]
        git clone git@gitlab.nektar.info:nektar.git nektar++
    \end{lstlisting}
34
35
36
37
    \begin{tipbox}
    You can easily switch to using the authenticated access from anonymous
    access at a later date.
    \end{tipbox}
38
39
40
	\end{itemize}
\end{itemize}

41
\subsection{Linux}
42
\subsubsection{Prerequisites}
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
\nekpp uses a number of external programs and libraries for some or all of its
functionality. Some of these are \emph{required} and must be installed prior to
compiling Nektar++, most of which are available as pre-built \emph{system}
packages on most Linux distributions or can be installed manually by a
\emph{user}. Others are optional and required only for specific features, or can
be downloaded and compiled for use with Nektar++ \emph{automatically} (but not
installed system-wide).

\begin{center}
\begin{tabular}{lccccl}
\toprule
Package & Req. & \multicolumn{3}{c}{Installation} & Note \\ \cline{3-5}
        &      & Sys. & User & Auto.              & \\
\midrule
C++ compiler    & \checkmark & \checkmark & & & gcc, icc, etc \\
CMake  $>2.8.7$ & \checkmark & \checkmark & \checkmark &            & Ncurses
GUI optional
\\
BLAS            & \checkmark & \checkmark & \checkmark &            & Or MKL,
ACML, OpenBLAS
\\
LAPACK          & \checkmark & \checkmark & \checkmark &            & \\
Boost $>1.49$   & \checkmark & \checkmark & \checkmark & \checkmark & Compile
with iostreams
\\
ModMETIS        & \checkmark &            &            & \checkmark & \\
FFTW $>3.0$     &            & \checkmark & \checkmark & \checkmark & For
high-performance FFTs\\
ARPACK $>2.0$   &            & \checkmark & \checkmark &            & For
arnoldi algorithms\\
OpenMPI         &            & \checkmark &            &            & For
parallel execution\\
GSMPI           &            &            &            & \checkmark & For
parallel execution\\
PetSC           &            &            & \checkmark & \checkmark &
Alternative linear solvers\\
Scotch          &            & \checkmark & \checkmark & \checkmark &
Alternative mesh partitioning\\
VTK $>5.8$      &         & \checkmark & \checkmark &            & Visualisation
utilities\\
\bottomrule
\end{tabular}
\end{center}

\begin{warningbox}
Boost version 1.51 has a bug which prevents \nekpp working correctly.
Please use a newer version.
\end{warningbox}
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130


\subsubsection{Quick Start}
Open a terminal.

If you have downloaded the tarball, first unpack it:
\begin{lstlisting}[style=BashInputStyle]
    tar -zxvf nektar++-4.0.0.tar.gz
\end{lstlisting}
Change into the \inlsh{nektar++} source code directory
\begin{lstlisting}[style=BashInputStyle]
    mkdir -p build && cd build 
    ccmake ../
    make install
\end{lstlisting}

\subsubsection{Detailed instructions}
From a terminal:
\begin{enumerate}
    \item If you have downloaded the tarball, first unpack it
    \begin{lstlisting}[style=BashInputStyle]
    tar -zxvf nektar++-4.0.0.tar.gz
    \end{lstlisting}
    
    \item Change into the source-code directory, create a \inltt{build}
    subdirectory and enter it 
    \begin{lstlisting}[style=BashInputStyle]
    mkdir -p build && cd build
    \end{lstlisting}
    
    \item Run the CMake GUI and configure the build
    \begin{lstlisting}[style=BashInputStyle]
    ccmake ../
    \end{lstlisting}
    \begin{itemize}
        \item Select the components of Nektar++ (prefixed with
        \inltt{NEKTAR\_BUILD\_}) you would like to build. Disabling solvers
        which you do not require will speed up the build process.
        \item Select the optional libraries you would like to use (prefixed with
        \inltt{NEKTAR\_USE\_}) for additional functionality.
131
132
133
        \item Select the libraries not already available on your system which
        you wish to be compiled automatically (prefixed with 
        \inltt{THIRDPARTY\_BUILD\_})
134
135
136
    \end{itemize}
    A full list of configuration options can be found in
    Section~\ref{s:installation:source:cmake}.
137
138
139
140
141
142
143
144
145

    \begin{notebox}
    Selecting \inltt{THIRDPARTY\_BUILD\_} options will request CMake to
    automatically download thirdparty libraries and compile them within the
    \nekpp directory. If you have administrative access to your machine, it is
    recommended to install the libraries system-wide through your
    package-management system.
    \end{notebox}
    
146
147
    
    \item Press \inltt{c} to configure the build. If errors arise relating to
148
149
150
    missing libraries, review the \inltt{THIRDPARTY\_BUILD\_} selections in
    the configuration step above or install the missing libraries manually or
    from system packages.
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
    
    \item When configuration completes without errors, press \inltt{c} again
    until the option \inltt{g} to generate build files appears. Press \inltt{g}
    to generate the build files and exit CMake.
    
    \item Compile the code
    \begin{lstlisting}[style=BashInputStyle]
        make install
    \end{lstlisting}
    During the build, missing third-party libraries will be automatically
    downloaded, configured and built in the \nekpp \inlsh{build} directory.
    
    % Hacky way to get an lstlisting to an argument of a macro
    \newsavebox\installationLinuxTip
    \begin{lrbox}{\installationLinuxTip}\begin{minipage}{0.8\linewidth}
    \begin{lstlisting}[style=BashInputStyle]
    make -j4 install
    \end{lstlisting}
    \end{minipage}
    \end{lrbox}
    
    \begin{tipbox}
    If you have multiple processors/cores on your system, compilation can be
    significantly increased by adding the \inlsh{-jX} option to make, where X is
175
176
    the number of simultaneous jobs to spawn. For example, use
    
177
    \noindent\usebox\installationLinuxTip
178
179
    
    on a quad-core system.
180
181
182
183
184
185
186
    \end{tipbox}
    
    \item Test the build by running unit and regression tests.
    \begin{lstlisting}[style=BashInputStyle]
    ctest
    \end{lstlisting}
\end{enumerate}
187
188

\subsection{OSX}
189
190

\subsubsection{Prerequisites}
191
192
193
194
195
196
197
198
199
\nekpp uses a number of external programs and libraries for some or all of its
functionality. Some of these are \emph{required} and must be installed prior to
compiling Nektar++, most of which are available on \emph{MacPorts}
(www.macports.org) or can be installed manually by a \emph{user}. Others are
optional and required only for specific features, or can be downloaded and 
compiled for use with Nektar++ \emph{automatically} (but not installed
system-wide).

\begin{notebox}
200
201
202
203
204
To compile \nekpp on OSX, Apple's Xcode Developer Tools must be installed. They
can be installed either from the App Store (only on Mac OS 10.7 and above) or
downloaded directly from
\href{http://connect.apple.com/}{http://connect.apple.com/} 
(you are required to have an Apple Developer Connection account).
205
206
207
Xcode includes Apple implementations of BLAS and LAPACK (called the Accelerate
Framework).
\end{notebox}
208

209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
\begin{center}
\begin{tabular}{lccccl}
\toprule
Package & Req. & \multicolumn{3}{c}{Installation} & Note \\ \cline{3-5}
        &      & MacPorts & User & Auto.              & \\
\midrule
Xcode           & \checkmark &            & & & gcc, icc, etc \\
CMake  $>2.8.7$ & \checkmark & \checkmark & \checkmark &            & Ncurses
GUI optional \\
BLAS            & \checkmark &            &            &            & Part of
Xcode \\
LAPACK          & \checkmark &            &            &            & Part of
Xcode \\
Boost $>1.49$   & \checkmark & \checkmark & \checkmark & \checkmark & Compile
with iostreams
\\
ModMETIS        & \checkmark &            &            & \checkmark & \\
FFTW $>3.0$     &            & \checkmark & \checkmark & \checkmark & For
high-performance FFTs\\
ARPACK $>2.0$   &            & \checkmark & \checkmark &            & For
arnoldi algorithms\\
OpenMPI         &            & \checkmark &            &            & For
parallel execution\\
GSMPI           &            &            &            & \checkmark & For
parallel execution\\
PetSC           &            & \checkmark & \checkmark & \checkmark &
Alternative linear solvers\\
Scotch          &            &            & \checkmark & \checkmark &
Alternative mesh partitioning\\
VTK $>5.8$      &            & \checkmark & \checkmark &            &
Visualisation utilities\\
\bottomrule
\end{tabular}
\end{center}

\newsavebox\installationOSXMacPortsTip
\begin{lrbox}{\installationOSXMacPortsTip}\begin{minipage}{0.8\linewidth}
246
247
248
\begin{lstlisting}[style=BashInputStyle]
sudo port install cmake
\end{lstlisting}
249
250
251
252
253
254
255
256
257
\end{minipage}
\end{lrbox}

\begin{tipbox}
CMake, and some other software, is available from MacPorts
(\url{http://macports.org}) and can be installed using, for example,

\noindent\usebox\installationOSXMacPortsTip
\end{tipbox}
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291


\subsubsection{Quick Start}
Open a terminal (Applications->Utilities->Terminal).

If you have downloaded the tarball, first unpack it:
\begin{lstlisting}[style=BashInputStyle]
    tar -zxvf nektar++-4.0.0.tar.gz
\end{lstlisting}
Change into the \inlsh{nektar++} source code directory
\begin{lstlisting}[style=BashInputStyle]
    mkdir -p build && cd build 
    ccmake ../
    make install
\end{lstlisting}

\subsubsection{Detailed instructions}
From a terminal (Applications->Utilities->Terminal):
\begin{enumerate}
    \item If you have downloaded the tarball, first unpack it
    \begin{lstlisting}[style=BashInputStyle]
    tar -zxvf nektar++-4.0.0.tar.gz
    \end{lstlisting}

    \item Change into the source-code directory, create a \inltt{build}
    subdirectory and enter it 
    \begin{lstlisting}[style=BashInputStyle]
    mkdir -p build && cd build
    \end{lstlisting}
    
    \item Run the CMake GUI and configure the build
    \begin{lstlisting}[style=BashInputStyle]
    ccmake ../
    \end{lstlisting}
292
293
    Use the arrow keys to navigate the options and \inlsh{ENTER} to select/edit
    an option.
294
295
296
297
298
299
    \begin{itemize}
        \item Select the components of Nektar++ (prefixed with
        \inltt{NEKTAR\_BUILD\_}) you would like to build. Disabling solvers
        which you do not require will speed up the build process.
        \item Select the optional libraries you would like to use (prefixed with
        \inltt{NEKTAR\_USE\_}) for additional functionality.
300
301
302
303
        \item Select the libraries not already available on your system which
        you wish to be compiled automatically (prefixed with 
        \inltt{THIRDPARTY\_BUILD\_})
        \item 
304
305
306
    \end{itemize}
    A full list of configuration options can be found in
    Section~\ref{s:installation:source:cmake}.
307

308
309
310
311
312
313
314
    \begin{notebox}
    Selecting \inltt{THIRDPARTY\_BUILD\_} options will request CMake to
    automatically download thirdparty libraries and compile them within the
    \nekpp directory. If you have administrative access to your machine, it is
    recommended to install the libraries system-wide through MacPorts.
    \end{notebox}
    
315
316
317
318
319
    \item Press \inltt{c} to configure the build. If errors arise relating to
        missing libraries (variables set to \inlsh{NOTFOUND}), review the 
        \inltt{THIRDPARTY\_BUILD\_} selections in the previous
    step or install the missing libraries manually or through MacPorts. 
    
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
    \item When configuration completes without errors, press \inltt{c} again
    until the option \inltt{g} to generate build files appears. Press \inltt{g}
    to generate the build files and exit CMake.
    
    \item Compile the code
    \begin{lstlisting}[style=BashInputStyle]
        make install
    \end{lstlisting}
    During the build, missing third-party libraries will be automatically
    downloaded, configured and built in the \nekpp \inlsh{build} directory.
    
    % Hacky way to get an lstlisting to an argument of a macro
    \newsavebox\installationMacTip
    \begin{lrbox}{\installationMacTip}\begin{minipage}{0.8\linewidth}
    \begin{lstlisting}[style=BashInputStyle]
    make -j4 install
    \end{lstlisting}
    \end{minipage}
    \end{lrbox}
    
    \begin{tipbox}
    If you have multiple processors/cores on your system, compilation can be
    significantly increased by adding the \inlsh{-jX} option to make, where X is
    the number of simultaneous jobs to spawn. For example,
    \noindent\usebox\installationMacTip
    \end{tipbox}
    
    \item Test the build by running unit and regression tests.
    \begin{lstlisting}[style=BashInputStyle]
    ctest
    \end{lstlisting}
\end{enumerate}


354
355

\subsection{Windows}
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
The following software must be pre-installed on your system:
\begin{itemize}
\item Microsoft Visual Studio 2008
\begin{itemize} 
    \item Visual Studio 2008 Service Pack 1 is required
\end{itemize}
\item Python Compiler 2.7.2+ (download from
\url{http://www.http//python.org/download/}) 
\item CMake 2.8.7+ (download from \url{http://www.cmake.org/HTML/index.html})
\begin{itemize}
    \item When prompted, select the option to add CMake to the system PATH.
\end{itemize}
\item WinRAR (download from \url{http://www.rarlab.com/download.htm})
\end{itemize}

\newcommand{\nekver}{\input{../../VERSION}}
\subsubsection{Unpack the tarballs}
\begin{itemize}
\item Unpack the \inlsh{nektar++-\nekver.tar.gz} file using
WinRAR
376
377
378
379
380
\item Create a \inlsh{ThirdParty} directory within the
\inlsh{nektar++-\nekver} subdirectory.

\begin{notebox}
 Some windows version do not
381
382
383
384
 recognise the path of a folder which has '++' in the name. If you think that 
 your windows version can not handle path containing special characters, you 
 should rename \inlsh{nektar++-\nekver} to
 \inlsh{nektar-\nekver}.
385
386
 \end{notebox}
 
387
388
389
\end{itemize}

\subsubsection{Building ThirdParty libraries}
390
391
Download ThirdParty packages from \inlsh{www.nektar.info/thirdparty} as requried
below.
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
\begin{itemize}
\item \textbf{TinyXML} Extract the \inlsh{tinyxml\_2\_4\_3.zip} archive into
the ThirdParty directory using WinRAR. This will create a \inlsh{tinyxml}
sub-directory.
\item \textbf{Loki} Extract the \inlsh{loki-0.1.3.tar.bz2} archive into the
ThirdParty directory using WinRAR. This will create a \inlsh{loki-0.1.3}
sub-directory.
\item \textbf{Mod-METIS} Extract the \inlsh{modmetis-4.0.tar.bz2} archive
into the ThirdParty directory using WinRAR. This will create a
\inlsh{modmetis-4.0} sub-directory.
\begin{itemize}
  \item Open a command-line terminal and change to
   \inlsh{ThirdParty\textbackslash modmetis-4.0\textbackslash build}.
  \item Run
    \begin{lstlisting}[style=BashInputStyle]
    cmake ..\
    vcbuild "ModifiedMetis.sln"
    vcbuild "INSTALL.vcproj"
    \end{lstlisting}
\end{itemize}
\item \textbf{NIST SparseBLAS} Extract the \inlsh{spblastk0.9b} archive
into the ThirdParty directory using WinRAR. This will create a
\inlsh{spblastk0.9b} sub-directory.
\begin{itemize}
  \item From a command-line terminal change to
  \inlsh{ThirdParty\textbackslash spblastk0.9b\textbackslash build}.
  \item Run
    \begin{lstlisting}[style=BashInputStyle]
    cmake ..\
    vcbuild "NistSparseBlasToolkit.sln"
    vcbuild "INSTALL.vcproj"
    \end{lstlisting}
\end{itemize}
\item \textbf{BLAS/LAPACK} Extract the \inlsh{blaslapack-dll.zip} archive
into the ThirdParty directory using WinRAR. This will create
\inlsh{blas\_win32.*} and \inlsh{lapack\_win32.*} files in the ThirdParty
directory.

\item \textbf{ZLib} Extract the \inlsh{zlib-1.2.3.tar.bz2} archive using
WinRAR. This will create a \inlsh{zlib-1.2.3} sub-directory.

\item \textbf{Boost} Extract the \inlsh{boost\_1\_49\_0.tar.bz2} archive using
WinRAR. This will create a {{{boost\_1\_49\_0}}} sub-directory.
\begin{itemize}
  \item Open a command-line terminal and change to the \inlsh{boost\_1\_49\_0}
  directory and run:
    \begin{lstlisting}[style=BashInputStyle]
    bootstrap.bat
    b2.exe -s ZLIB_SOURCE=..\..\..\..\zlib-1.2.3 \ 
            --prefix=..\boost toolset=msvc-9.0 install
    \end{lstlisting}
\end{itemize}
\begin{notebox}
Boost might not be able to find the \inlsh{zlib-1.2.3} directory specified
by the relative path in the command line above. If this happens, you can 
replace the relative path with the absolute path of the \inlsh{zlib-1.2.3}
directory (surround it in quotes).
\end{notebox}
\end{itemize}

\subsubsection{Building Nektar++}
Change to the \inlsh{nektar++-\nekver\textbackslash builds} directory.
\begin{lstlisting}[style=BashInputStyle]
cmake ..\
vcbuild "Nektar++.sln"
vcbuild "INSTALL.vcproj"
\end{lstlisting}
To modify the default configuration use \inlsh{cmake -i ..\textbackslash} or use
the CMake-gui application.


\subsubsection{Notes on building on windows 7 64 bit with Visual Studio 10}
To get a build working on a windows 7 64 bit machine with VS10, the following
modifications were helpful or necessary:
\begin{itemize}
\item Instead of vcbuild (which doesn't exist in VS10) use msbuild. 
\item You may need to run \\ \inlsh{C:\textbackslash Program Files
(x86)\textbackslash Microsoft Visual Studio 10.0\textbackslash
VC\textbackslash vcvarsall.bat} \\ first to set up some registry entries to run
msbuild.
 Try without first.
\item You will probably wish to put msbuild into your path
\item project files created by cmake are likely to have the extension .vcxproj
 rather than .vcproj.
\item When running b2.exe, provide the full path to zlib. Not doing so will only
 cause an error later when running cmake for Nektar++ 
\item When running b2.exe, use toolset=msvc-10.0 instead of toolset=msvc-9.0
\item When using cmake for nektar++, it is helpful to use the cmake gui
\item Using the cmake gui, set the BOOST\_ROOT variable to the appropriate path
for boost * Set Boost\_USE\_STATIC\_LIBS = ON (I did this by editing
CMakeLists.txt, but setting it from the gui should work)
\item When running msbuild "Nektar++.sln" I got error can't find zlib.lib. As a
 workaround, copy the files zlibd.lib (two of them) and rename the copies zlib.lib. 
 However, I believe these are the debug builds, so it would be better to work 
 out how to build in release mode.
\item At this stage, when running msbuild "Nektar++.sln", I got boost link
errors.
 To fix them, look for the line
\begin{lstlisting}[style=BashInputStyle]
ADD_DEFINITIONS(-DBOOST_ALL_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK \
    -DBOOST_IOSTREAMS_DYN_LINK -DBOOST_THREAD_DYN_LINK)
\end{lstlisting}
in the \inlsh{CMakeLists.txt} file and comment it out (and run cmake again) 
\item At this point, when building Nektar, linking against boost is fine, but I
got a compile error in TestData.cpp. This could be fixed by editing TestData.cpp
and replacing the line 
\begin{lstlisting}
m_doc = new TiXmlDocument(pFilename.file_string().c_str());
\end{lstlisting}
with
\begin{lstlisting}
m_doc =new TiXmlDocument(pFilename.string().c_str());
\end{lstlisting}
\end{itemize}

\begin{notebox}
The step of building INSTALL.vcproj causes executables and dlls to be copied
into a directory \inlsh{<path>\textbackslash
nektar\textbackslash builds-test\textbackslash dist\textbackslash bin}.
The executables should be run from here so that they can find the dlls they need.
\end{notebox}

If you wish to put a breakpoint in to step through Nektar++, you may need to run
from the folder the executable was built in so that the pdb files are in the
expected place. Then a workaround is to copy the dlls into that folder.
517
518

\subsection{CMake Option Reference}
519
\label{s:installation:source:cmake}
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
This section describes the main configuration options which can be set when
building Nektar++. The default options should work on almost all systems, but
additional features (such as parallelisation and specialist libraries) can be
enabled if needed.

\subsubsection{Components}
The first set of options specify the components of the Nektar++ toolkit to
compile. Some options are dependent on others being enabled, so the available
options may change.

Components of the \nekpp package can be selected using the following options:
\begin{itemize}
    \item \inlsh{NEKTAR\_BUILD\_DEMOS} (Recommended)
    
    Compiles the demonstration programs. These are primarily used by the
    regression testing suite to verify the \nekpp library, but also provide an
    example of the basic usage of the framework.

538
539
540
541
542
543
544
    \item \inlsh{NEKTAR\_BUILD\_DOC}

    Compiles the Doxygen documentation for the code. This will be put in
    \begin{lstlisting}[style=BashInputStyle]
    $BUILDDIR/doxygen/html
    \end{lstlisting}

545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
    \item \inlsh{NEKTAR\_BUILD\_LIBRARY} (Required)
    
    Compiles the Nektar++ framework libraries. This is required for all other
    options.

    \item \inlsh{NEKTAR\_BUILD\_SOLVERS} (Recommended)
    
    Compiles the solvers distributed with the \nekpp framework.

    If enabling \inlsh{NEKTAR\_BUILD\_SOLVERS}, individual solvers can be
    enabled or disabled. See Chapter~\ref{s:solvers} for the list of available
    solvers. You can disable solvers which are not required to reduce
    compilation time. See the \inlsh{NEKTAR\_SOLVER\_X} option.

    \item \inlsh{NEKTAR\_BUILD\_TESTS} (Recommended)

    Compiles the testing program used to verify the \nekpp framework.

    \item \inlsh{NEKTAR\_BUILD\_TIMINGS}

    Compiles programs used for timing \nekpp operations.

    \item \inlsh{NEKTAR\_BUILD\_UNIT\_TESTS}

    Compiles tests for checking the core library functions.

    \item \inlsh{NEKTAR\_BUILD\_UTILITIES}

    Compiles utilities for pre- and post-processing simulation data.
    
    \item \inlsh{NEKTAR\_SOLVER\_X}
    
    Enabled compilation of the 'X' solver.
\end{itemize}

A number of ThirdParty libraries are required by \nekpp. There are also
optional libraries which provide additional functionality. These can be selected
using the following options:
\begin{itemize}
    \item \inlsh{NEKTAR\_USE\_BLAS\_LAPACK} (Required)
    
    Enables the use of Basic Linear Algebra Subroutines libraries for linear
    algebra operations.

    \item \inlsh{NEKTAR\_USE\_SYSTEM\_BLAS\_LAPACK} (Recommended)
    
    On Linux systems, use the default BLAS and LAPACK library on the system.
    This may not be the implementation offering the highest performance for your
    architecture, but it is the most likely to work without problem.
    
    \item \inlsh{NEKTAR\_USE\_OPENBLAS}
    
    Use OpenBLAS for the BLAS library. OpenBLAS is based on the Goto BLAS
    implementation and generally offers better performance than a non-optimised
    system BLAS. However, the library must be installed on the system.
    
    \item \inlsh{NEKTAR\_USE\_MKL}
    
    Use the Intel MKL library. This is typically available on cluster
    environments and should offer performance tuned for the specific cluster
    environment.
    
    \item \inlsh{NEKTAR\_USE\_MPI} (Recommended)
    
    Build Nektar++ with MPI parallelisation. This allows solvers to be run in
    serial or parallel.
    
    \item \inlsh{NEKTAR\_USE\_FFTW}
    
    Build Nektar++ with support for FFTW for performing Fast Fourier Transforms
    (FFTs). This is used only when using domains with homogeneous coordinate
    directions.
    
    \item \inlsh{NEKTAR\_USE\_ARPACK}
    
    Build Nektar++ with support for ARPACK. This provides routines used for
    linear stability analyses. Alternative Arnoldi algorithms are also
    implemented directly in Nektar++.
    
    \item \inlsh{NEKTAR\_USE\_VTK}
    
    Build Nektar++ with support for VTK libraries. This is only needed for
    specialist utilities and is not needed for general use.
    
    \begin{notebox}
    The VTK libraries are not needed for converting the output of simulations to
    VTK format for visualization as this is handled internally.
    \end{notebox}
\end{itemize}

The \inlsh{THIRDPARTY\_BUILD\_X} options select which third-party libraries are
automatically built during the \nekpp build process. Below are the choices of X:
\begin{itemize}
    \item \inlsh{BOOST}

    The \emph{Boost} libraries are frequently provided by the operating system,
    so automatic compilation is not enabled by default. If you do not have
    Boost on your system, you can enable this to have Boost configured
    automatically.

    \item \inlsh{GSMPI}
    
    (MPI-only) Parallel communication library.
    
    \item \inlsh{LOKI}
    
    An implementation of a singleton.
    
    \item \inlsh{METIS}
    
    A graph partitioning library used for substructuring of matrices and mesh
    partitioning when Nektar++ is run in parallel.
    
    \item \inlsh{TINYXML}
    
    Library for reading and writing XML files.
\end{itemize}