Commit 68ef1138 authored by Julian Marcon's avatar Julian Marcon

Tidy and update paramater names

parent ce0d9151
......@@ -842,22 +842,22 @@ example which generates a 2D NACA wing.
<MESHING>
<INFORMATION>
<I PROPERTY="CADFile" VALUE="6412" />
<I PROPERTY="MeshType" VALUE="2D" />
<I PROPERTY="CADFile" VALUE="6412" />
<I PROPERTY="MeshType" VALUE="2D" />
</INFORMATION>
<PARAMETERS>
<P PARAM="MinDelta" VALUE="0.01" />
<P PARAM="MaxDelta" VALUE="1.0" />
<P PARAM="EPS" VALUE="0.1" />
<P PARAM="Order" VALUE="4" />
<P PARAM="MinDelta" VALUE="0.01" />
<P PARAM="MaxDelta" VALUE="1.0" />
<P PARAM="EPS" VALUE="0.1" />
<P PARAM="Order" VALUE="4" />
<!-- 2D Domain !-->
<P PARAM="Xmin" VALUE="-1.0" />
<P PARAM="Ymin" VALUE="-2.0" />
<P PARAM="Xmax" VALUE="3.0" />
<P PARAM="Ymax" VALUE="2.0" />
<P PARAM="AOA" VALUE="15.0" />
<P PARAM="Xmin" VALUE="-1.0" />
<P PARAM="Ymin" VALUE="-2.0" />
<P PARAM="Xmax" VALUE="3.0" />
<P PARAM="Ymax" VALUE="2.0" />
<P PARAM="AOA" VALUE="15.0" />
</PARAMETERS>
</MESHING>
......@@ -868,9 +868,9 @@ parameters. It firstly needs to know the CAD file with which to work. In the
example above this is listed as a 4 digit number, this is because the mesh
generator is equiped with a NACA wing generator. In all other cases this
parameter would be a STEP file. Secondly, what type of mesh to make, the options
are \inltt{EULER} and \inltt{BL} for 3D meshes and \inltt{2D} and \inltt{2DBL}
are \inltt{EULER} and \inltt{BndLayer} for 3D meshes and \inltt{2D} and \inltt{2DBndLayer}
for 2D meshes. In the case of \inltt{EULER} the mesh will be made with only
tetrahedra. For \inltt{BL} the mesh generator will attempt to insert a single
tetrahedra. For \inltt{BndLayer} the mesh generator will attempt to insert a single
macro prism layer onto the geometry surface. This option requires additional
parameters. This is similar for the 2D scenarios. The automatic mesh
specification system requires three parameters to build the specification of a
......@@ -889,35 +889,35 @@ An example is shown.
<MESHING>
<INFORMATION>
<I PROPERTY="CADFile" VALUE="6412" />
<I PROPERTY="MeshType" VALUE="2DBL" />
<I PROPERTY="CADFile" VALUE="6412" />
<I PROPERTY="MeshType" VALUE="2DBndLayer" />
</INFORMATION>
<PARAMETERS>
<P PARAM="MinDelta" VALUE="0.01" />
<P PARAM="MaxDelta" VALUE="1.0" />
<P PARAM="EPS" VALUE="0.1" />
<P PARAM="Order" VALUE="4" />
<P PARAM="MinDelta" VALUE="0.01" />
<P PARAM="MaxDelta" VALUE="1.0" />
<P PARAM="EPS" VALUE="0.1" />
<P PARAM="Order" VALUE="4" />
<!-- Boundary layer !-->
<P PARAM="BLSurfs" VALUE="5,6" />
<P PARAM="BLThick" VALUE="0.03" />
<P PARAM="BLLayers" VALUE="4" />
<P PARAM="BLProg" VALUE="2.0" />
<P PARAM="BndLayerSurfaces" VALUE="5,6" />
<P PARAM="BndLayerThickness" VALUE="0.03" />
<P PARAM="BndLayerLayers" VALUE="4" />
<P PARAM="BndLayerProgression" VALUE="2.0" />
<!-- 2D Domain !-->
<P PARAM="Xmin" VALUE="-1.0" />
<P PARAM="Ymin" VALUE="-2.0" />
<P PARAM="Xmax" VALUE="3.0" />
<P PARAM="Ymax" VALUE="2.0" />
<P PARAM="AOA" VALUE="15.0" />
<P PARAM="Xmin" VALUE="-1.0" />
<P PARAM="Ymin" VALUE="-2.0" />
<P PARAM="Xmax" VALUE="3.0" />
<P PARAM="Ymax" VALUE="2.0" />
<P PARAM="AOA" VALUE="15.0" />
</PARAMETERS>
</MESHING>
</NEKTAR>
\end{lstlisting}
A list of the CAD surfaces which will have a prism generated on is described by
\inltt{BLSurfs} and the thickness of the boundary to aim for is \inltt{BLThick}.
\inltt{BndLayerSurfaces} and the thickness of the boundary to aim for is \inltt{BndLayerThickness}.
%
The mesh generator has been created with a range of error messages to aid in
debugging. If you encounter an error and the mesh generator fails, run \nm with
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment